Wall of Frames 2025
Source: https://www.ucd.ie/eacollege/research/wallofframes2025/ Parent: https://www.ucd.ie/eacollege/
The College of Engineering & Architecture hosts the Wall of Frames, which was opened on December 2nd 2015. There are 24 Publications on display, and this selection has been identified as being of particular significance in the calendar year of 2025 due to their impact and diversity.
On This Page
- School of Architecture Planning & Environmental Policy
- School of Biosystems & Food Engineering
- School of Chemical & Bioprocess Engineering
- School of Civil Engineering
- School of Electrical & Electronic Engineering
- School of Mechanical & Materials Engineering
School of Architecture Planning & Environmental Policy
Do environmental and climate scores for financial institutions reflect lending and underwriting activity? A case study of global banks.
This paper presents the findings of research carried out at UCD by Dr Charlie Cregan, Adjunct Assoc Prof Andrew Kelly, and Prof Peter Clinch of the School of Architecture, Planning & Environmental Policy.
The outputs from this research contribute to the UN Sustainable Development Goals:\ SDG 9 | SDG 12 | SDG 13 | SDG 15
Regulation of the bioeconomy: Barriers, drivers and potential for innovation in the case of Ireland
This paper presents the findings of research carried out at UCD by Ms Anne Pender, Dr Luke Kelleher, and Prof Eoin O’Neill of the School of Architecture, Planning & Environmental Policy.
The outputs from this research contribute to the UN Sustainable Development Goals:\ SDG 12 | SDG 13 | SDG 16
IoT-Based Route Recommendation for an Intelligent Waste Management System Ghahramani
This paper presents the findings of research carried out at UCD by Dr Anna Molter and Prof Francesco Pilla of the School of Architecture, Planning & Environmental Policy.
The outputs from this research contribute to the UN Sustainable Development Goals: \ SDG 9 | SDG 11 | SDG 12
More than Concrete Blocks: Dublin City's twentieth-century buildings and their stories
This Book publication includes contributions from Dr Ellen Rowley (Editor) and Ms Merlo Kelly from the School of Architecture, Planning & Environmental Policy.
The outputs from this research contribute to the UN Sustainable Development Goals: \ SDG 11 | SDG 13
School of Biosystems & Food Engineering
Human health risk assessment of lead (Pb) through the environmental-food pathway
This paper presents the findings of research carried out at UCD by Dr Rajat Nag and Prof Enda Cummins of the School of Biosystems and Food Engineering.
The outputs from this research contribute to the UN Sustainable Development Goals: \ SDG 3 | SDG 6
Effects of dielectric properties and microstructures on microwave-vacuum drying of mushroom (Agaricus bisporus) caps and stipes evaluated by non-destructive techniques
This paper presents the findings of research carried out at UCD by Prof Colm O’Donnell and Prof Da-Wen Sun of the School of Biosystems and Food Engineering.
The outputs from this research contribute to the UN Sustainable Development Goals: \ SDG 2
Economic and environmental sustainability analysis of seaweed farming: Monetising carbon offsets of a brown algae cultivation system in Ireland
This paper presents the findings of research carried out at UCD by Dr Charlene Vance and Associate Professor Fionnuala Murphy of the School of Biosystems and Food Engineering.
The outputs from this research contribute to the UN Sustainable Development Goals: \ SDG 8 | SDG 9 | SDG 12 | SDG 13
Combining deep learning with chemometrics when it is really needed: A case of real time object detection and spectral model application for spectral image processing
This paper presents the findings of research carried out at UCD by Associate Professor Junli Xu of the School of Biosystems and Food Engineering.
The outputs from this research contribute to the UN Sustainable Development Goals: \ SDG 12
School of Chemical & Bioprocess Engineering
Electro-Oxidation Reaction of Methanol over La2-xSrxNiO4+δ Ruddlesden-Popper Oxides
This paper presents the findings of research carried out at UCD by Prof Niall English of the School of Chemical and Bioprocess Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 7 | SDG 9
Fast and efficient digestion of adeno-associated virus (AAV) capsid proteins for liquid chromatography mass spectrometry (LC-MS) based peptide mapping and post-translational
This paper presents the findings of research carried out at UCD by Dr Jonathan Bones of the School of Chemical and Bioprocess Engineering NIBRT.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 9
Correlating Magnetic Hyperthermia and Magnetic Resonance Imaging Contrast Performance of Cubic Iron Oxide Nanoparticles with Crystal Structural Integrity
This paper presents the findings of research carried out at UCD by Assoc Prof Steven Ferguson of the School of Chemical and Bioprocess Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 3
Upcycling natural Limestone waste for thermochemical energy storage by utilising tailored CaZrO3 nanoadditives
This paper presents the findings of research carried out at UCD by Dr Veronica Sofianos of the School of Chemical and Bioprocess Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 7
School of Civil Engineering
A data-driven approach for drive-by damage detection in bridges considering the influence of temperature change
This paper presents the findings of research carried out at UCD by Mr Robert Corbally and Associate Prof Abdollah Malekjafarian of the School of Civil Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 9 | SDG 11 | SDG 13
Enhanced wave overtopping simulation at vertical breakwaters using machine learning algorithms
This paper presents the findings of research carried out at UCD by Mr Md Habib, Assoc. Prof John O’Sullivan and Dr Md Salauddin, of the UCD Dooge Centre for Water Resources in the School of Civil Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 11 | SDG 13 | SDG 15
Cascading failure and recovery of metro–bus double-layer network considering recovery propagation
This paper presents the findings of research carried out at UCD by Dr Beatriz Martinez-Pastor of the School of Civil Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 11
Multi-Directional Base Isolation System for Coupled Horizontal and Vertical Seismic Excitations
This paper presents the findings of research carried out at UCD by Assoc Prof Daniel McCrum of the School of Civil Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 9 | SDG 11
School of Electrical & Electronic Engineering
A Wide-Range High-Voltage-Gain Bidirectional DC-DC Converter for V2G and G2V Hybrid EV Charger
This paper presents the findings of research carried out at UCD by Dr Hamed Heydari-Doostabad and Assoc. Prof Terence O’Donnell of the School of Electrical and Electronic Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 7
ANNet: A Lightweight Neural Network for ECG Anomaly Detection in IoT Edge Sensors
This paper presents the findings of research carried out at UCD by Dr Barry Cardiff and Dr Deepu John of the School of Electrical and Electronic Engineering.
The outputs from this research contribute to the UN Sustainable Development Goals:\ SDG 3
Broadband GaN MMIC Doherty Power Amplifier Using Continuous-Mode Combining for 5G Sub-6 GHz Applications
This paper presents the findings of research carried out at UCD by Prof Anding Zhu of the School of Electrical and Electronic Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 9
Estimation of respiratory rate and exhale duration using audio signals recorded by smartphone microphones
This paper presents the findings of research carried out at UCD by Dr Emer Doheny and Prof Madeleine Lowery of the School of Electrical and Electronic Engineering, and members of the Insight SFI Research Centre for Data Analytics.
The outputs from this research contribute to the UN Sustainable Development Goals:\ SDG 3
School of Mechanical & Materials Engineering
Diversification, concentration and renewability of the energy supply in the European Union
This paper presents findings from research carried out at UCD by Prof Donal Finn of the School of Mechanical and Materials Engineering and a member of the UCD Energy Institute.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 7 | SDG 13
Effect of heat treatment on the microstructure and mechanical properties of AZ80M magnesium alloy fabricated by wire arc additive manufacturing
This paper presents findings from research supported by Assoc Prof Mert Celikin of the School of Mechanical and Materials Engineering.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 9
Ultra-low wide bandwidth vibrational energy harvesting using a statically balanced compliant mechanism
This paper presents findings from research carried out at UCD by Prof Vikram Pakrashi of the School of Mechanical and Materials Engineering, and Director of the UCD Centre for Mechanics.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 7 | SDG 9 | SDG 13
Mechanical characterisation of commercial artificial skin models
This paper presents findings from research carried out at UCD by Assoc Prof Eoin O’Cearbhaill and Prof Aisling Ní Annaidh of the School of Mechanical and Materials Engineering, and members of UCD Centre for Biomedical Engineering, and I-Form, Research Ireland (SFI) Centre for Advanced Manufacturing.
The output(s) from this research contribute to the UN Sustainable Development Goals: \ SDG 3
UCD College of Engineering and Architecture
Room 122 & Room 126, UCD Engineering and Materials Science Centre, University College Dublin, Belfield, Dublin 4, Ireland T: +353 1 716 1868 | E: eng.arch@ucd.ie | collegeea@ucd.ie | engarch.research@ucd.ie | Location Map
All Student Emails should be submitted using our Engineering and Architecture Office Student Connector. This will ensure the fastest and most efficient reply to your email.