Master of Science in Corrosion Engineering
Source: https://www.utp.edu.my/Pages/Admission/Postgraduate/Master-by-Coursework/MSc-in-Corrosion-Engineering-ODL.aspx Parent: https://www.utp.edu.my/Pages/Admission/Home/Postgraduate.aspx
Master by Coursework (ODL)
- MBA in Energy Management (ODL)
- MSc in Asset Management and Maintenance (ODL)
- MSc in Electronic Systems Engineering (ODL)
- MSc in Offshore Engineering (ODL)
- MSc in Geoscience (ODL)
- MSc in Process Integration (ODL)
- MSc in Process Safety (ODL)
- MSc in Drilling Engineering (ODL)
- MSc in Applied Computing (ODL)
- MSc in Industrial Environmental Engineering (ODL)
- MSc in Corrosion Engineering (ODL)
- MSc in Petroleum Engineering (ODL)
- MSc in Data Science (ODL)
- MSc in Predictive Analytics
Master by Coursework
- MSc in Process Safety
- MSc in Process Integration
- MSc in Petroleum Geoscience
- MSc in Petroleum Engineering
- MSc in Offshore Engineering
- MSc in Industrial Environmental Engineering
- MSc in Electronic System Engineering
- MSc in Drilling Engineering
- MSc in Corrosion Engineering
- MSc in Applied Computing
- MSc in Asset Management and Maintenance
- MBA in Energy Management
Postgraduate
Master of Science in Corrosion Engineering
(N-DL/0714/7/0001) (10/27) (MQA/PSA15250)
Introduction
Embark on an exciting career where science meets sustainability! Corrosion engineering is at the forefront of protecting the world’s infrastructure—from pipelines and plant structures to energy systems and aerospace technology. Our programme is the one-of-its-kind in South East Asia that specialises in Corrosion Engineering. By joining this programme, you’ll gain the required knowledge and practical skills to develop innovative solutions that prevent material degradation, reduce maintenance costs, and extend the lifespan of critical assets. Be part of corrosion professions that play a vital role in fostering a future in structure sustainability and asset protection for industries worldwide. Start your journey in UTP today and make a lasting impact to innovate, protect and sustain.
\
Programme Objectives
The objective of the programme is to produce:
- Corrosion Engineering specialists with insights to articulate complex industry problems and solutions.
- Industry leaders with integrity towards sustainable future development Sustainable Development Goals (SDG) through continuous improvement and innovation for the betterment of society.
Programme Outcomes
At the end of the programme, graduates should be able to:
- Demonstrate in-depth and frontier knowledge and understanding in Corrosion Engineering field or practice.
- Critically and creatively apply knowledge in Corrosion Engineering or more fields to resolve complex disciplinary and practical problems.
- Conduct credible problem solving or investigation to resolve complex issues and questions in the Corrosion Engineering field or practice.
- Conduct research or investigation with minimal supervision. adhering to legal, ethical, professional and sustainable practice
- Demonstrate leadership qualities through collaboration with peers and others.
- Communicate and interact effectively with peers in corrosion fields as well as general audience.
- Select and use suitable digital and analytical tool techniques to resolve problems; and
- Demonstrate commitment to lifelong learning and personal development.
\
\
What is ODL & How it is Conducted in UTP
ODL stands for Open and Distance Learning, a way of studying remotely that offers flexibility for learning from anywhere, anytime, and anyhow with self-directed learning strategies.
In UTP, ODL is conducted as below:
- 100% online with self-instructional materials (SIMS)
- 8 hours of online live class session for each course in one semester
- Classes after working hours/over the weekend
- Assessments include assignments, projects, online open-book test and final exam.\
\
Programme Highlights
- One-of-a-kind programme in the South East Asia
- Modular-based courses specially tailored for industry needs
- Upskilling programme for career advancement in corrosion field
- Leverage our vast industry network and boost your industry readiness
- Access to state-of-the-art in-campus corrosion laboratory facilities
\
Programme Details
Department: Department of Mechanical Engineering
Intakes: January, May, and September
Mode of Deliverance:
• Full Time Conventional
• Full Time ODL
• Minimum study duration: 12 months Maximum study duration: 36 months
\
Entry Requirements
- Candidates must hold a bachelor degree in Engineering OR Engineering Technology discipline with minimum CGPA 2.50/4.00 or equivalent in the relevant field from a recognized university.
- Candidates with bachelor degree in Engineering OR engineering Technology discipline with minimum CGPA 2.00 but below 2.50, must have minimum 5 years working experience and can be admitted after passing UTP internal rigorous assessment interview session.
- Candidates with bachelor degree qualification from different disciplines, must undergo and pass two pre-requisite courses from Mechanical Engineering Programme.
\ Apel.A field:
- Candidates must be at least 30 years old and possess STPM, diploma or other equivalent recognised qualifications, along with relevant work experience.
- Candidates who pass the APEL.A T7 assessment can be admitted to MSc by coursework programmes.
\ English Requirements
For International students, with a minimum IELTS score of 5.0 OR TOEFL score of 500 OR its equivalence.
\
*Estimated Total Cost Fee*
- Full Time ODL: RM 23,100 (Malaysian), RM 30,000 (International)\
\
*Career Prospects*
Graduates with MSc in Corrosion Engineering will enhance their employment and industrial career prospects in the corrosion-related fields. The qualification accelerates career progression attaining high level competency.
\
Areas of opportunities:
• Upstream: Exploration & Production
• Downstream: Refinery & Petrochemicals
• Power: Process-related & Infrastructure
• Consultant services & testing
• Industry: Manufacturing
• Academia
• R&D
\
Programme Curriculum Structure and Programme Module Synopsis
\ \
ODL Programme Curriculum Structure
Each student is required to complete 40credit hours. The programme curriculum structure is shown as below:
| Course Code | Course Name | Course Type | Credit Hours | ||||
| Semester 1 | |||||||
| OAB 5114 | Principles of Corrosion | Core | 4 | ||||
| OAB 5123 | Engineering Materials, Fundamentals and Selection | Core | 3 | ||||
| OAB 5134 | Corrosion Control, Monitoring and Management System | Core | 4 | ||||
| OAN 5032 | Research Methodology | NR | 2 | ||||
| OAU 5022 | Project Management | UR | 2 | ||||
| 15 | |||||||
NR = National Requirement
UR = University Requirement
\
| Semester 2 | |||
| OAU 5362 | Data Analytics | UR | 2 |
| OAB 5214 | Corrosion Inhibition, Cathodic Protection and Protective Coating | Core | 4 |
| OAB 5223 | Engineering Failure Analysis and Inspections | Core | 3 |
| OAB 5244 | Industrial-Based Project I | Project | 4 |
| 13 |
| Semester 3 | |||
| OAB 5316 | Research Project II | Project | 6 |
| OAB 5XX3 | Elective Course I | Elective | 3 |
| OAB 5XX3 | Elective Course II | Elective | 3 |
| 12 |
| Electives (Choose any two) | ||||
| OAB 5323 | Oilfield and Process-related Corrosion | Elective | 3 | |
| OAB 5333 | Microbiologically Influenced Corrosion | Elective | 3 | |
| OAB 5343 | High Temperature Corrosion | Elective | 3 | |
| OAB 5353 | Pipeline Corrosion Management | Elective | 3 | |
ODL Programme Module Synopsis
| Course Code | Module | Credit Hour |
| OAB 5114 | Principles of Corrosion | 4 credits |
| This course introduces the fundamental science underlying various corrosion phenomena and surface treatment that can be used for protection. The role of electrochemistry in corrosion is explained and the different experimental methods of measuring corrosion rates for metals follow from the kinetic and thermodynamic behaviours expected in different environments. Different forms of corrosion are introduced. Case studies are used to introduce students to the standard equipment used for corrosion measurement and classes using problem-based learning to allow students to become familiar with directing their own investigations of corrosion problems. |
| Course Code | Module | Credit Hour |
| OAB 5123 | Engineering Materials, Fundamentals and Selection | 3 credits |
| This course provides a comprehensive understanding of engineering materials, covering their properties, processing and applications in various engineering contexts. It emphasizes the relationship between material properties and their performance in real-world applications, considering environmental, design, and economic factors. |
| Course Code | Module | Credit Hour |
| OAB 5134 | Corrosion Control and Management System | 4 credits |
| This course discusses common classes of material used in the Oil and Gas industry in relation to the service environment and design criteria. The various corrosion mechanisms and corrosion damages encountered in the Oil and Gas industry will all be considered during the course. Influence of process parameters, fluid type, CO2, H2S and O2 corrosion process and factor influencing them will be discussed. Through analysis of the chemical and physical characteristics of the system the precipitant will estimate the system corrosivity with the recap and review of materials selection and coatings for corrosion resistance for different conditions and applications. Fundamental to Cathodic protection (CP) will be also discussed. CP survey techniques for buried structure as well as factors to be considered when designing of a Cathodic Protection system (e.g. estimating current requirements) will be explored. The participant will learn how to select and utilize corrosion inhibitors for different systems based on the fluid type and service environment. Selection of the appropriate corrosion inspection and monitoring techniques will also be discussed. Furthermore, Risk Based Inspection as a current trend in defining the inspection frequency requirements will be explained. |
| Course Code | Module | Credit Hour |
| OAB 5214 | Cathodic Inhibtion, Cathodic Protection and Protective Coating | 4 credits |
| This course covers the corrosion control methods with the use of corrosion inhibitor, cathodic protection and protective coatings to mitigate different forms of corrosion. Topics covered are corrosion control types, their mechanisms, applications, system monitoring, performance evaluation and mitigation strategies for various industry processes. |
| Course Code | Module | Credit Hour |
| OAB 5223 | Engineering Failure Analysis and Inspection | 3 credits |
| This course covers introduction to failure analysis and prevention, corrosion failure, materials selection for failure prevention, manufacturing aspects of failure and prevention, structural life assessment methods, tools and techniques in failure analysis, case studies in failure analysis, and risk-based Inspection. |
| Course Code | Module (Elective) | Credit Hour |
| OAB 5323 | Oilfield and Process-related Corrosion | 3 credits |
| This course covers the damage mechanisms and material failures commonly found in upstream oilfield, downstream refinery and process-related industries. The topics covered are the damage description, mechanisms, damage appearance, affected equipment, critical factors, inspection & monitoring, prevention & mitigation strategies for these corrosion processes in upstream, midstream and downstream industry. |
| Course Code | Module (Elective) | Credit Hour |
| OAB 5333 | Microbiologically Influenced Corrosion | 3 credits |
| The course will cover basic corrosion management principles, basic MIC mechanisms, use of molecular microbiological methods (MMM) in diagnosing and managing MIC, selection of MIC mitigation methods, selection and interpretation of MIC monitoring methods, case studies demonstrating MIC diagnostic tools, and demonstrate applicable sampling techniques/equipment. |
| Course Code | Module (Elective) | Credit Hour |
| OAB 5343 | High Temperature Corrosion | 3 credits |
| This course offers a comprehensive understanding of the mechanisms, prevention, and control of high-temperature corrosion. It covers fundamental principles, various types of corrosion, material behavior at elevated temperatures, and practical solutions for industries exposed to high-temperature environments. Additionally, the course equips corrosion engineers with essential problem-solving skills and knowledge needed to address high-temperature degradation in gas turbines and power plants. Throughout the course, students will gain a robust understanding of the fundamental principles that govern high-temperature corrosion processes, including the various types of corrosion. Additionally, the course will address the latest advancements in high-temperature corrosion research, exploring new materials, technologies, and methods that are used to control high temperature corrosion. |
| Course Code | Module (Elective) | Credit Hour |
| OAB 5353 | Pipeline Corrosion Management | 3 credits |
| This course discusses common classes of material used in the pipeline industry in relation to the service environment and design criteria. The main type of corrosion damages encountered in the Oil and Gas pipeline will be considered. Influence of process, fluid regime, material, CO2, H2S, O2 and MIC corrosion process and factor influencing them will be discussed. Chemical sampling and analysis of the pipeline fluid system as an index of fluid corrosivity and subsequent required control measures will be discussed in detail. Fundamental to Cathodic Protection (CP) for external protection of the pipeline will be discussed with CP survey techniques for both offshore and onshore pipelines. Furthermore, factors to be considered when designing a CP system (e.g. estimating current requirements) will be explored. The participant will learn how to select and utilize corrosion inhibitors for different systems based on the fluid type and service environment, and how to select and apply corrosion inspection and monitoring techniques for the pipeline. Risk Based Inspection as a current trend in defining the inspection frequency requirements will also be explained. |
| Course Code | Module | Credit Hour |
| OAN 5032 | Research Methodology | 2 credits |
| Series of seminars on topics related to research preparations: manage and plan research activities, think creatively, setup experimental/model for theory verification, prepare to commercialise research, prepare research report and communicate research output effectively. |
| Course Code | Module | Credit Hour |
| OAB 5244 | Industrial-Based Project I | 4 credits |
| The module allows each student to work independently on industry-based projects under the supervision of a faculty member and/or a supervisor from the industry. The student is expected to review the subject, propose an experimental / analytical plan and follow that through to feasibility study, investigation, design / simulation, test and implementation. Each student must prepare a comprehensive technical report, present and demonstrate findings and results of the project work. |
| Course Code | Module | Credit Hour |
| OAB 5316 | Research Project II | 6 credits |
| The module allows each student to work independently on industry-based projects under the supervision of a faculty member and/or a supervisor from the industry. The student is expected to review the subject, propose an experimental / analytical plan and follow that through to feasibility study, investigation, design / simulation, test and implementation. Each student must prepare a comprehensive technical report, present and demonstrate findings and results of the project work. |
\
\ \
Contact
Programme Manager
Dr. Kee Kok Eng
Email: keekokeng@utp.edu.my
Direct Line: +6053687151
\
Academic Executive
Ms Farah Abdul Latif
Email: farahlatif@utp.edu.my
Direct Line: +6053687030
\
General Inquiries
Ms Nurul Asmira Sulaiman
Email: asmira.sulaiman@utp.edu.my
Direct Line: +6053688192
\ \
FAQ
Q1. How the ODL classes be held?
A1. All the ODL course materials shall be accessible online in ULEARX platform where the students can learn from anytime, anywhere and anyhow at your self-study pace amidst work commitment. Students may also attend online live classes by joining MST, or watch the session recordings later.
\
Q2. How will the Industry-based project be done online?
A2. The proposed research project can be experiment/simulation or corrosion failure investigation case that is closely related to your professional line of work, so that the student can contribute to the research element of the project.
\
Q3. What does it mean by minimum study duration of 12 months to maximum 36 months?
A3: Up to the student’s study pacing and work commitment, student can plan on what and how many courses to enrol in each semester, so that he/she can complete the MSc within these study durations.
\ \
\ \ \ \ \ \