Metadata
Title
Projects
Category
general
UUID
6b16d163c6a44a1cbbfd349ff3a811c7
Source URL
https://ri.kfupm.edu.sa/irc-am/research/projects/2
Parent URL
https://ri.kfupm.edu.sa/irc-am/research/projects
Crawl Time
2026-03-16T05:16:27+00:00
Rendered Raw Markdown
# Projects

**Source**: https://ri.kfupm.edu.sa/irc-am/research/projects/2
**Parent**: https://ri.kfupm.edu.sa/irc-am/research/projects

Research

- [Research Areas](https://ri.kfupm.edu.sa/irc-am/research/research-areas)
- [Projects](https://ri.kfupm.edu.sa/irc-am/research/projects)
- [Publications](https://ri.kfupm.edu.sa/irc-am/research/publications)
- [Scientific Patents](https://ri.kfupm.edu.sa/irc-am/research/scientific-patents)
- [Collaborators & Industrial Partners](https://ri.kfupm.edu.sa/irc-am/research/partners)
- [Books](https://ri.kfupm.edu.sa/irc-am/research/books)

##### Internally Funded Research Projects

| S. No | Project details | PI | CoI |
| --- | --- | --- | --- |
| 1 | Development of Environmentally Friendly Antiscalant Formulations for Reverse Osmosis Desalination Plants (2022) | Dr. Ali Shaikh Asrof | Dr. Faizur Rahman |
| 2 | Anticorrosion and Flame-Retardant Multifunctional Polymer Coating for Industrial Structures (2021) | Dr. Mohammad Mizanur Rahman | Dr. Rami Suleiman, Dr. A. Madhan Kumar, Dr. Jafar Mojumder, Dr. Md Hasan Zahir |
| 3 | Development of Thermoelectric Generators on Flexible Substrates for Wearable Systems (2021) | Dr. Jhonathan Prieto Rojas | Dr. Saleem Rao, Dr. Muhammad Hawwa |
| 4 | Development of palm tree fiber reinforced polymer composites (2021) | Dr. Morsi M. Mahmoud | Dr. Zayd C. Leseman, Dr. Thomas F. Garrison, Dr. Jafar Albinmousa |
| 5 | Developing wear and corrosion resistant coatings using a biomimetic approach (2021) | Dr. M. Abdul Samad | Dr. Ihsanulhaq Toor |
| 6 | Joining of light weight hybrid structures (2021) | Dr. Fadi Al-Badour | Dr. Necar Merah, Dr. Jafar Albin Mousa, Dr. Akeem Adesina |
| 7 | Development of waste tire rubber reinforced polymer composites (2021) | Dr. Akeem Yusuf Adesina | Dr. A. Madhan Kumar, Dr. Ahmad Sorour, Dr. Morsi Mahmoud |
| 8 | Development and in-depth electrochemical performance evaluation of economic lean duplex stainless steel alloys (2021) | Dr. Ihsan Ul Haq Toor | Dr. M. Abdul Samad, Dr. A. Madhan Kumar |
| 9 | Development of Potential Sweet Corrosion Inhibitors from the Waste Residue of the Salsola Imbricata Plant of Saudi Origin (2021) | Dr. Rami Khalid Mohammad Suleiman | Dr. Saviour Umoren |
| 10 | [Green Corrosion Inhibition: Fundamentals, Design, Synthesis and Applications](https://ri.kfupm.edu.sa/irc-am/research/projects/projects-detail/green-corrosion-inhibition-fundamentals-design-synthesis-and-applications) |  |  |
| 11 | [Tribology in Sustainable Composites](https://ri.kfupm.edu.sa/irc-am/research/projects/projects-detail/tribology-in-sustainable-composites) |  |  |
| 12 | [Polymeric materials in corrosion inhibition - Fundamentals and Applications](https://ri.kfupm.edu.sa/irc-am/research/projects/projects-detail/polymeric-materials-in-corrosion-inhibition---fundamentals-and-applications) | S. A. Umoren | M. M. Solomon, V. S. Saji |
| 13 | Development of Bioactive Titanium-Containing High Entrophy Alloy for Biomedical Applications [2022-2024] (Funded by DROC) | Dr. Mohamed Abdrabou Hussein |  |
| 14 | Effects of Nano-Particles on the Physical Properties of MgB2 Composites [2021-2023] (Funded by DROC) | Dr. Khalil Ali Ali Al-Ziq |  |
| 15 | Green synthesis of antimicrobial metal oxide nanostructures for bovine mastitogen [2021-2023] (Funded by DROC) | Dr. Anwar Ul-Hamid |  |
| 16 | Design and development of novel hetero-architectured materials for applications in highly ‎efficient high power laser diodes, solar cells and biosensors [2021-2023] (Funded by DROC) | Dr. Tawfik Saleh Awadh |  |
| 17 | Next-generation multifunctional ternary nanostructured materials for low cost ‎and high-‎performance energy storage devices [2021-2023] (Funded by DROC) | Dr. Tawfik Saleh Awadh |  |
| 18 | Development of Machine Learning Algorithms for Estimating Failures Due to Complex Loading or Geometry [2021-2023] (Funded by DROC) | Dr. Jafar Albinmousa |  |
| 19 | Hybrid Additive Manufacturing and Friction Stir Processing for Crack Repair Applications [2021-2023] (Funded by DROC) | Dr. Fadi Al-Badour |  |
| 20 | Development of Carbon Nanodots as Fluorescent Materials and Their Mechanistic Studies in Catalysis [2021-2023] (Funded by DROC) | Dr. Almaz Jalilov |  |

##### Contractual Industrial Research Projects

[All Projects](https://pure.kfupm.edu.sa/en/organisations/interdisciplinary-research-center-for-advanced-materials/projects/)