Master of Professional Engineering
Source: https://www.uts.edu.au/courses/master-of-professional-engineering Parent: https://www.uts.edu.au/courses/bachelor-of-engineering-honours-software
Advance your engineering
The Master of Professional Engineering provides an opportunity for technical specialists and engineers who have completed either a three-year Bachelor of Technology or a non-accredited four-year Bachelor of Engineering to graduate with an Engineers Australia-accredited professional engineering qualification.
Choose a program of study that not only helps to deepen the body of knowledge acquired in your first degree but also gives you an opportunity to embark on a 12-week professional experience or equivalent.
If you have completed a Bachelor of Engineering or Bachelor of Engineering (Honours) accredited by Engineers Australia at the level of Professional Engineer, or an equivalent international qualification recognised under the Washington Accord, you should apply for the Master of Engineering or Master of Engineering (Extension).
Part of the Faculty of Engineering and Information Technology.
Share
share
link
Link copied
EXPLORE
Master of Professional Engineering
CODE
UTS: C04309 (version 5)
CRICOS: 088084G
DURATION
2 years full time\ 4 years part time
INTAKE question_mark These are dates to consider when applying for your course, including when applications open and close.
Autumn Session 2026\ Spring Session 2026\ Autumn Session 2027\ Spring Session 2027
COURSE FEES question_mark This indicative tuition fee is an estimate for the entire course, based on full-time study each year. Fees are reviewed annually and may change.
Indicative total tuition fee for domestic students\ $74,990.00
LOCATION question_mark Our classes are held at our City Campus, or specialist off-campus locations. Some of our courses are delivered via online (distance) learning.
City campus
What you'll study
This course is designed to incorporate an integrated approach to professional engineering practice through professional engineering subjects, major-specific subjects, an independent project and engineering practice stream.
The project component consists of a preparatory subject and a project (in the area of the major) which must be undertaken in successive sessions, typically the final three sessions of the course.
You can select two elective subjects from postgraduate programs offered by the Faculty of Engineering and Information Technology.
Subjects at a glance
-
Core subjects
| Subject Code | Subject Name |
|---|---|
| 42203 | Sustainable Engineering Design |
| 41055 | Professional Experience Review |
| 41035 | Professional Practice Preparation 1 |
See all subjects and majors in the UTS Handbook arrow_right_alt
Admissions information
Admissions information
Use the buttons to expand or collapse the section.
-
Course description
This course is for technical specialists and non-accredited engineers seeking an Engineers Australia-accredited qualification to advance their careers. Choose this program to elevate your expertise in your chosen discipline and prepare for professional engineering practice.
What sets this course apart is its integrated approach to professional engineering practice, combining professional engineering subjects, engineering discipline subjects, an independent project, and an engineering practice stream. You'll not only expand your existing knowledge but can also engage in a 12-week professional experience or equivalent to meet Engineers Australia's requirements.
You'll acquire advanced knowledge and practical skills, particularly through an independent graduate project in your selected major. This course is ideal if you're aiming to refine your abilities and attain an accredited professional qualification. Choose this path to become a more competent and sought-after engineering professional.
This course allows students to choose a program of study that not only helps to deepen the body of knowledge acquired in their first degree, but also gives them an opportunity to embark on a 12-week professional experience or equivalent (as required by Engineers Australia). It also provides a unique opportunity to deepen their knowledge and gain practical skills by undertaking an independent engineering graduate project in their chosen major. - ### Important dates
Find out more about application dates relating to this course - ### Scholarships and prizes
Discover our scholarships for undergraduate, postgraduate and research students. Our scholarships celebrate diversity and academic excellence. Use the scholarship search tool to find the right scholarship for you.
Scholarships for domestic students
Scholarships for international students - ### Course duration
This course is offered on a two-year, full-time or four-year, part-time basis.
The course is made up of subjects that provide students with flexibility. Classes are usually held in standard mode (weekly attendance) or block mode (attend classes only two or three times during the session per subject). - ### Admission requirements
To be eligible for admission to this course, applicants must meet the following criteria.
Applicants must have the following qualifications in Engineering or Computer Science in an area relevant to the proposed major:
- Completed Australian bachelor's degree, or overseas equivalent, in Engineering at the Engineering technologist level or below, or Computer Science with at least 75% of all subjects completed at pass level (conceded pass not included).
Applicants who do not meet the above pass-rate requirement will be considered if they have one of the following additional qualifications, taken post completion of study in a completed Australian bachelor's degree, or overseas equivalent, in Engineering at the Engineering technologist level or below, or Computer Science:
- Completed Australian graduate diploma or graduate certificate, or overseas equivalent, in any field of study with at least 75% of all subjects completed at pass level (conceded pass not included) AND A minimum of 2 years full-time, or equivalent part-time, relevant professional work experience.
OR
- Completed Australian master's or doctoral degree, or overseas equivalent, in any field of study.
OR
- Completion of C11236 Graduate Certificate in Engineering in an area relevant to the proposed major.
Applicants with a completed a Bachelor of Engineering that is accredited by Engineers Australia at the level of Professional Engineer should apply for the C04271 Master of Engineering or C04277 Master of Engineering (Extension).
Applicants who are seeking accreditation by Engineers Australia at the level of Professional Engineer but do not meet the criteria above should consider Undergraduate options such as C09066 Bachelor of Engineering (Honours), C09067 Bachelor of Engineering (Honours) Diploma in Professional Engineering Practice.
Applicants who are not seeking accreditation should consider applying for C11238 Graduate Certificate in Engineering Studies, noting that this course is a not a pathway to C04309 Master of Professional Engineering.
Supporting documentation to be submitted with the application
For applicants who need to demonstrate professional work experience:
- Curriculum VitaeAND Statement of service in one of the following formats:
- A 'Statement of Service' provided by the employer
- A completed 'UTS statement of service' signed by the employer
- A statutorydeclarationconfirming professional work experience (for Australian Residents only)
- An official letter from the applicant's accountant or solicitor on their company letterhead confirming the applicant's professional work experience or engagement with the business, duration of operations, and the nature of the business
- A business certificate of registration in original language and English (e.g. provision of ASIC documentation or ABN or similar documentation for Australian Businesses)
Eligibility for admission does not guarantee offer of a place.
English language requirements
IELTS Academic: overall 6.5, writing 6.0 TOEFL iBT (0-120): overall 79, writing 21 TOEFL iBT (1-6): overall 4, writing 4.5 UTS College AE5: Pass Pearson PTE: overall 58, writing 50 Cambridge C1A / C2P: overall 176, writing 169 - ### Domestic course fees
2026 Indicative tuition fees for domestic students
As a postgraduate student, you'll be responsible for covering your own tuition fees.
2026 Tuition Fee
- Indicative first-year tuition fee: $36,670.00
- Indicative total tuition fee: $74,990.00
You can choose to pay your fees upfront per session, or if you’re eligible, you can defer them using a government FEE-HELP loan. This loan helps you cover all or part of your tuition fees. Keep in mind that applications for this loan are specific to each course.
Additional Costs
Your tuition fees do not include:
- The Student Services and Amenities Fee (SSAF), which supports student services and activities. If eligible, you can defer this fee using SA-HELP.
- Textbooks, materials, and other course-related costs.
- Any applicable payment processing fees (e.g., credit card surcharges).
Important Information
- Fees are shown in Australian Dollars (AUD).
- The indicative tuition fees above are based on full-time study (1 year = 48 credit points).
- Your actual fees depend on the year you enrol, your study load and the subjects you choose. Some subjects fall into different student contribution bands.
- You can calculate your student contribution based on the amounts listed in the student contribution table
Alumni Advantage Program
As a UTS graduate, you can enjoy a 10% discount on your course fees. Just apply for the course you're interested in, and if you're accepted, the discount will automatically be applied to your enrolment invoice. Learn more about the Alumni Advantage Program.
If you have any questions about course fees, please feel free to make an enquiry.
Information for Masters by Research students: Government-funded scholarship places available
As a recipient of the Australian Government’s Research Training Program (RTP) Fees Offset Scholarship, you do not have to pay tuition fees for up to the maximum period of candidature. However, even with this scholarship, you should expect ongoing costs that aren’t covered, like travel, training, and professional development. These costs can vary for each person, so it’s important to plan accordingly. Additionally, scholarships are available to help with your living expenses.
Important details: The RTP Fees Offset Scholarship covers your tuition fees, but please note that it doesn’t include additional costs related to studying or conducting research. Additional fees for domestic students. For more information visit Research student fees. - ### Inherent requirements
Inherent requirements are academic and non-academic requirements that are essential for successfully completing a course at UTS. You can find the inherent requirements for your course via the inherent requirements directory. - ### Professional recognition
The Master of Professional Engineering, majoring in Biomedical Engineering, Civil Engineering, Cybersecurity Engineering or Mechanical Engineering, is fully accredited by Engineers Australia at the level of Professional Engineer, and is recognised internationally by signatories to the Washington Accord. The Electrical Energy Systems Engineering, Robotics, and Telecommunications and Electronics majors are provisionally accredited pending full accreditation and are expected to be eligible for full accreditation once a representative group of graduates has emerged. - ### Recognition of prior learning
Students may be eligible for up to a total of 24cp of subject exemptions based on recognition of prior learning (RPL) as follows:
- Students who have completed subjects deemed by the faculty as being equivalent subjects in a postgraduate program or UTS recognised undergraduate engineering program of a minimum of 4 years or equivalent.
- Subject exemption is applicable only to 12cp from CBK90743 Electives (Engineering), 6cp from CBK90982 Choice (Professional Engineering) and 6cp from the options in the relevant major.
Other/additional RPL may be granted via subject substitution to an alternative/advanced postgraduate subject in a similar field of study.
To be considered for recognition of prior learning, subjects must normally have been completed no more than ten years prior to the commencement of this course. - ### Important notes
Students who do not meet the admission requirements may be eligible for admission to the Graduate Certificate in Engineering Studies (C11238) or the Master of Engineering (C04271)
The following majors within this course are not available for intake in Spring 2026:
- MAJ03512 Biomedical Engineering
- MAJ03533 Robotics
Find more Engineering courses
Entry schemes and pathways
### Recognition of prior learning (RPL)
At UTS, we understand the dedication it takes to reach your current position – forging a path through prior study, work, and diverse learning experiences.
### Jumbunna Admission Program
If you're Aboriginal or Torres Strait Islander, Jumbunna is an alternative application process for our courses that emphasises diverse pathways to success.
### Changing from another postgraduate course
You can apply for our courses using your previous study. You may even be eligible for recognition of prior learning, so you won’t need to repeat subjects.
Where you’ll study
Our world-class facilities support your future-focused learning and high-impact research. They enable effective partnerships with industry and provide services to our community.
See more facilities arrow_forward
See more facilities arrow_forward
Practice advanced manufacturing at ProtoSpace.
Experience the future of engineering at Tech Fest.
Our campus is a base for your academic, professional and social life.
Find your perfect study spot and enjoy the quiet away from the campus bustle.
arrow_back
arrow_back
arrow_forward
Why UTS?
Why study Engineering at UTS
Engineers are pivotal in the technology revolution. With a degree in engineering at UTS, you'll learn the latest technical and leadership skills to solve practical industry challenges and address global issues.
Our degrees prioritise hands-on learning. With over 1000 partner companies to choose from, you'll have ample opportunities to apply innovative approaches to industry problems, studios and hackathons before you graduate.
11.7%
increase in engineering manager positions over the next five years.
Labour Market Insights 2021
$187,700
Median annual earnings as engineering managers.
Labour Market Insights 2021
Above world standard
for Engineering.
2018 Excellence in Research for Australia (ERA) evaluation
Upcoming events
calendar_today
On-demand
location_on
Online
attach_money
Free admission
calendar_today
On-demand
attach_money
Free admission
### Postgraduate UTS Business School On-Demand Videos
calendar_today
On-demand
location_on
Online
attach_money
Free admission
### Recording: Accountability, resistance and disruption – The future of disability policy
location_on
Online
attach_money
Free admission
calendar_today
On-demand
location_on
Online
attach_money
Free admission
calendar_today
On-demand
attach_money
Free admission
### Postgraduate UTS Business School On-Demand Videos
calendar_today
On-demand
location_on
Online
attach_money
Free admission
### Recording: Accountability, resistance and disruption – The future of disability policy
location_on
Online
attach_money
Free admission
arrow_back
arrow_back
arrow_forward
Make an enquiry
Considering studying at UTS? Connect with our team to explore your study options, the application process, and discuss any other questions you may have.
Are you a domestic or international student?\
Domestic studentInternational student
If you are an international student, get in touch by completing the
international student enquiry form.
The information you provide in this form will be used to respond to your enquiry. Your information may also be used to provide you with general information about the university. Please refer to our privacy policies for details.
Fields marked with an asterisk (*) are required.
What level of study are you interested in?\
Please select... Undergraduate Postgraduate
First name\
Last name\
Email\
Mobile\
What course area are you interested in?\
Please select... Non Faculty Specific Architecture Building Business Communication Design Education Engineering Health Information Technology International Studies Law Public Policy and Governance Science and Mathematics Transdisciplinary Innovation
What is your enquiry about?\
Course enquiryFees/ScholarshipsAdmissionsRecognition of Prior LearningOffer and enrolmentsOther
Let us know how we can help?\
If you know your UTS Student number or Application Number please include it in your enquiry
Please upload any supporting files by clicking on the button below\
I would like to receive more information about UTS courses and events from UTS\
Yes, send me more information
Terms and Conditions\
Yes, I agree with the UTS Marketing Privacy Notice.
Valid Email\
CorrectInCorrect
resultState\
utm_url
\
/courses/master-of-professional-engineering
utm_campaign
\
utm_source\
utm_medium\
utm_content\
course_code\
\
Related courses
### Doctor of Philosophy (PhD Thesis: Engineering)
location_on
City campus
schedule
4 years full time 8 years part time
### Graduate Certificate in Engineering
location_on
City campus
schedule
0.5 years full time 1 year part time
### Graduate Certificate in Engineering Management
location_on
City campus
schedule
0.5 years full time 1 year part time
### Graduate Certificate in Engineering Studies
location_on
City campus
schedule
0.5 years full time 1 year part time
### Doctor of Philosophy (PhD Thesis: Engineering)
location_on
City campus
schedule
4 years full time 8 years part time
### Graduate Certificate in Engineering
location_on
City campus
schedule
0.5 years full time 1 year part time
### Graduate Certificate in Engineering Management
location_on
City campus
schedule
0.5 years full time 1 year part time
### Graduate Certificate in Engineering Studies
location_on
City campus
schedule
0.5 years full time 1 year part time
arrow_back
arrow_back
arrow_forward
Typical course program
Expedita repellendus voluptatem doloremque sint. Consequuntur nemo et inventore similique sit. Quod et earum aut sed aliquam. Qui qui vel tempora tenetur sequi quasi voluptatem vitae. Voluptatum doloribus voluptas.
See typical course program in the UTS Handbook arrow_forward